Please visit our HOME Page for current pricing and promotions
The best way to order is to call us or to email us your vehicle(s) information (make, model and year), or by using our ORDERING FORM!
The EZcarlift™ is one of the simplest devices on the market. It is simple, but somewhat different from all other lifts. One of the objectives was to have access to all underbody components. The other objective was to not exceed the foot print of the car. This made it impossible to have a One-Size-Fits-All unit and mandated to be configured to your vehicle(s).
The basic EZcarlift™ consists of:
- two (2) lifting Ramps, together capable of lifting up to 4,400 lbs [2.0 ton].
Each ramp has two (2) rubber pads, adjusting from 8" to 59" [20 to 150 cm] apart - “L”.
Note: optional Ramp Extension Kit (REK) can add up to 12" [30 cm] length.
- one set of two (2) Cross Spacers (space bars). The Cross Spacers should be selected to match the width “W” (W1/W2)- left to right location of your vehicle’s jack points of your vehicle.
Various sizes will accommodate jacking point width of 20" to 72" [50 to 183 cm]!
Included with the EZcarlift™ is a Gear Box Lube (GBL) needed to fill the gear boxes before initial use, and a 3/8" socket adapter for the drill.
Not included - a 3/8" six (6) point deep cut socket,(preferred for use on the lift's drive) and the electric drill - (see list a of drill motors customers and us have tested and used).
Some of our popular Accessories:
- a set of Wall Hangers (WH) to hang the lift and its accessories when not in use
- a set of Rubber Blocks (IHP) to protect trim or parts of the underbody from being damaged
- a kit for use on softer surfaces (SSK) or to protect your finished garage floor (FSK).
We look forward to hearing from you! Thank you for your interest in EZcarlift™!



